LDAP module

Admin Guide

Overview

The LDAP module implements an LDAP search interface for OpenSIPS. It exports script functions to perform an LDAP search operation and to store the search results as OpenSIPS AVPs. This allows for using LDAP directory data in the OpenSIPS SIP message routing script.

The following features are offered by the LDAP module:

• LDAP search function taking an LDAP URL as input both synchronous and asynchronous
• LDAP result parsing functions to store LDAP data as AVP
• Support for accessing multiple LDAP servers
• LDAP SIMPLE authentication
• LDAP server failover and automatic reconnect
• Configurable LDAP connection and bind timeouts
• Module API for LDAP search operations that can be used by other OpenSIPS modules
• StartTLS support

The module implementation makes use of the open source OpenLDAP library available on most UNIX/Linux platforms. Besides LDAP server failover and automatic reconnect, this module can handle multiple LDAP sessions concurrently allowing to access data stored on different LDAP servers. Each OpenSIPS worker process maintains one LDAP TCP connection per configured LDAP server. This enables parallel execution of LDAP requests and offloads LDAP concurrency control to the LDAP server(s).

An LDAP search module API is provided that can be used by other OpenSIPS modules. A module using this API does not have to implement LDAP connection management and configuration, while still having access to the full OpenLDAP API for searching and result handling.

Since LDAP server implementations are optimized for fast read access they are a good choice to store SIP provisioning data. Performance tests have shown that this module achieves lower data access times and higher call rates than other database modules like e.g. the OpenSIPS MYSQL module.

Usage Basics

First so called LDAP sessions have to be specified in an external configuration file (as described in ldap config). Each LDAP session includes LDAP server access parameters like server hostname or connection timeouts. Normally only a single LDAP session will be used unless there is a need to access more than one LDAP server. The LDAP session name will then be used in the OpenSIPS configuration script to refer to a specific LDAP session.

The ldap_search function (ldap search fn) performs an LDAP search operation. It expects an LDAP URL as input which includes the LDAP session name and search parameters. ldap urls provides a quick overview on LDAP URLs.

The result of an LDAP search is stored internally and can be accessed with one of the ldap_result* functions. ldap_result (ldap result fn) stores resulting LDAP attribute value as AVPs. ldap_result_check (ldap result check fn) is a convenience function to compare a string with LDAP attribute values using regular expression matching. Finally, ldap_result_next (ldap result next fn) allows to handle LDAP search queries that return more than one LDAP entry.

All ldap_result* functions do always access the LDAP result set from the last ldap_search call. This should be kept in mind when calling ldap_search more than once in the OpenSIPS configuration script.

LDAP URLs

ldap_search expects an LDAP URL as argument. This section describes the format and semantics of an LDAP URL.

RFC 4516 RFC4516 describes the format of an LDAP Uniform Resource Locator (URL). An LDAP URL represents an LDAP search operation in a compact format. The LDAP URL format is defined as follows (slightly modified, refer to section 2 of RFC4516 for ABNF notation):

ldap://[ldap_session_name][/dn?attrs[?scope[?filter]]]]

ldap_session_name

An LDAP session name as defined in the LDAP configuration file.

(RFC 4516 defines this as LDAP hostport parameter)

dn

Base Distinguished Name (DN) of LDAP search or target of non-search operation, as defined in RFC 4514 RFC4514

attrs

Comma separated list of LDAP attributes to be returned

scope

Scope for LDAP search, valid values are “base”, “one”, or “sub”

filter

LDAP search filter definition following rules of RFC 4515 RFC4515

Note

The following table lists characters that have to be escaped in LDAP search filters:

Note

Non-URL characters in an LDAP URL have to be escaped using percent-encoding (refer to section 2.1 of RFC 4516). In particular this means that any ”?” character in an LDAP URL component must be written as “%3F”, since ”?” is used as a URL delimiter. The exported function ldap_filter_url_encode (ldap filter url encode fn) implements RFC 4515/4516 LDAP search filter and URL escaping rules.

Dependencies

OpenSIPS Modules

The module depends on the following modules (the listed modules must be loaded before this module):

• No dependencies on other OpenSIPS modules.

External Libraries or Applications

The following libraries or applications must be installed before running OpenSIPS with this module loaded:

• OpenLDAP library (libldap) v2.1 or greater, libldap header files (libldap-dev) are needed for compilation

LDAP Configuration File

The module reads an external confiuration file at module initialization time that includes LDAP session definitions.

Configuration File Syntax

The configuration file follows the Windows INI file syntax, section names are enclosed in square brackets:

[Section_Name]

Any section can contain zero or more configuration key assignments of the form

key = value ; comment

Values can be given enclosed with quotes. If no quotes are present, the value is understood as containing all characters between the first and the last non-blank characters. Lines starting with a hash sign and blank lines are treated as comments.

Each section describes one LDAP session that can be referred to in the OpenSIPS configuration script. Using the section name as the host part of an LDAP URL tells the module to use the LDAP session specified in the respective section. An example LDAP session specification looks like:

[example_ldap]
ldap_server_url            = "ldap://ldap1.example.com, ldap://ldap2.example.com"
ldap_bind_dn               = "cn=sip_proxy,ou=accounts,dc=example,dc=com"
ldap_bind_password         = "pwd"
ldap_network_timeout       = 500
ldap_client_bind_timeout   = 500
ldap_ca_cert_file       = "/usr/share/ca-certificates/mycert.pem"
ldap_cert_file         = "/var/my-certificate/certificate.pem"
ldap_key_file         = "/var/my-certificate/key.pem"
ldap_require_certificate   = "ALLOW"

The configuration keys are explained in the following section. This LDAP session can be referred to in the routing script by using an LDAP URL like e.g.

ldap://example_ldap/cn=admin,dc=example,dc=com

LDAP Session Settings

ldap_server_url (mandatory)

LDAP URL including fully qualified domain name or IP address of LDAP server optionally followed by a colon and TCP port to connect: ldap://<FQDN/IP>[:<port>]. Failover LDAP servers can be added, each separated by a comma. In the event of connection errors, the module tries to connect to servers in order of appearance.

Default value: none, this is a mandatory setting

ldap_server_url examples

ldap_server_url = "ldap://localhost"
ldap_server_url = "ldap://ldap.example.com:7777"
ldap_server_url = "ldap://ldap1.example.com,
                   ldap://ldap2.example.com:80389"

ldap_version (optional)

Supported LDAP versions are 2 and 3.

Default value: 3 (LDAPv3)

ldap_version example

ldap_version = 2

ldap_bind_dn (optional)

Authentication user DN used to bind to LDAP server (module currently only supports SIMPLE_AUTH). Empty string enables anonymous LDAP bind.

Default value: "" (empty string —> anonymous bind)

ldap_bind_dn example

ldap_bind_dn = "cn=root,dc=example,dc=com";

ldap_bind_password (optional)

Authentication password used to bind to LDAP server (SIMPLE_AUTH). Empty string enables anonymous bind.

Default value: "" (empty string —> anonymous bind)

ldap_bind_password example

ldap_bind_password = "secret";

ldap_network_timeout (optional)

LDAP TCP connect timeout in milliseconds. Setting this parameter to a low value enables fast failover if ldap_server_url contains more than one LDAP server addresses.

Default value: 1000 (one second)

ldap_network_timeout example

ldap_network_timeout = 500 ; setting TCP timeout to 500 ms

ldap_client_bind_timeout (optional)

LDAP bind operation timeout in milliseconds.

Default value: 1000 (one second)

ldap_client_bind_timeout example

ldap_client_bind_timeout = 1000

ldap_ca_cert_file (optional)

LDAP full path of the CA certificate file.

No default value. It is mandatory in case you wish to use StartTLS

ldap_ca_cert_file example

ldap_ca_cert_file = "/usr/local/CAcert.pem"

ldap_cert_file (optional)

LDAP full path of the certificate file.

No default value. It is mandatory in case you wish to use StartTLS

ldap_cert_file example

ldap_cert_file = "/usr/local/mycert.pem"

ldap_key_file (optional)

LDAP full path of the key file.

No default value. It is mandatory in case you wish to use StartTLS

ldap_key_file example

ldap_key_file = "/usr/local/mykey.pem"

ldap_require_certificate (optional)

LDAP peer certificate checking strategy, one of “NEVER”, “HARD”, “DEMAND”, “ALLOW”, “TRY”. Lower case letters are also accepted.

Default value “NEVER”.

ldap_require_certificate example

ldap_require_certificate = "NEVER"

Configuration File Example

The following configuration file example includes two LDAP session definitions that could be used e.g. for accessing H.350 data and do phone number to name mappings.

Example LDAP Configuration File

# LDAP session "sipaccounts":
#
# - using LDAPv3 (default)
# - two redundant LDAP servers
#
[sipaccounts]
ldap_server_url = "ldap://h350-1.example.com, ldap://h350-2.example.com"
ldap_bind_dn = "cn=sip_proxy,ou=accounts,dc=example,dc=com"
ldap_bind_password = "pwd"
ldap_network_timeout = 500
ldap_client_bind_timeout = 500
#using StartTLS
ldap_ca_cert_file = "/ldap/path/to/ca/certificate.pem"
ldap_cert_file = "/ldap/path/to/certificate.pem"
ldap_key_file = "/ldap/path/to/key/file.pem"
ldap_require_certificate = "NEVER"


# LDAP session "campus":
#
# - using LDAPv2
# - anonymous bind
#
[campus]
ldap_version = 2
ldap_server_url = "ldap://ldap.example.com"
ldap_network_timeout = 500
ldap_client_bind_timeout = 500

Exported Parameters

config_file (string)

Full path to LDAP configuration file.

Default value: /usr/local/etc/opensips/ldap.cfg

config_file parameter usage

modparam("ldap", "config_file", "/etc/opensips/ldap.ini")

max_async_connections (int)

Number of maximum asynchronous connections that will be started with the ldap server for executing asynchronous ldap_search calls. The number of connections is per process, so if there are 8 worker processes with 20 max_async_connections, there will be a maximum of 160 connections to the ldap server.

Default value: 20

max_async_connections parameter usage

modparam("ldap", "max_async_connections", 50)

Exported Functions

ldap_search(ldap_url)

Performs an LDAP search operation using given LDAP URL and stores result internally for later retrieval by ldap_result* functions. If one ore more LDAP entries are found the function returns the number of found entries which evaluates to TRUE in the OpenSIPS configuration script. It returns -1 (FALSE) in case no LDAP entry was found, and -2 (FALSE) if an internal error like e.g. an LDAP error occurred.

ldap_url (string)

An LDAP URL defining the LDAP search operation (refer to ldap urls for a description of the LDAP URL format). The hostport part must be one of the LDAP session names declared in the LDAP configuration script.

Search with LDAP session named sipaccounts, base ou=sip,dc=example,dc=com, one level deep using search filter (cn=schlatter) and returning all attributes:

Example Usage of ldap_url

ldap://sipaccounts/ou=sip,dc=example,dc=com??one?(cn=schlatter)

Subtree search with LDAP session named ldap1, base dc=example,dc=com using search filter (cn=$(avp(name))) and returning SIPIdentityUserName and SIPIdentityServiceLevel attributes

Example Usage of ldap_url

ldap://ldap_1/dc=example,dc=com?
       SIPIdentityUserName,SIPIdentityServiceLevel?sub?(cn=$(avp(name)))

n > 0 (TRUE):

• Found n matching LDAP entries

-1 (FALSE):

• No matching LDAP entries found

-2 (FALSE):

• LDAP error (e.g. LDAP server unavailable), or
• internal error

This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.

Example Usage

...
# ldap search
if (!ldap_search("ldap://sipaccounts/ou=sip,dc=example,dc=com??one?(cn=$rU)"))
{
    switch ($retcode)
    {
    case -1:
        # no LDAP entry found
        sl_send_reply(404, "User Not Found");
        exit;
    case -2:
        # internal error
        sl_send_reply(500, "Internal server error");
        exit;
    default:
        exit;
    }
}
xlog("L_INFO", "ldap_search: found [$retcode] entries for (cn=$rU)");

# save telephone number in $avp(tel_number)
ldap_result("telephoneNumber/$avp(tel_number)");
...

ldap_result(ldap_attr_name, avp_spec, [avp_type], [regex_subst])

This function converts LDAP attribute values into AVPs for later use in the message routing script. It accesses the LDAP result set fetched by the last ldap_search call. ldap_attr_name specifies the LDAP attribute name who’s value should be stored in AVP avp_spec. Multi valued LDAP attributes generate an indexed AVP. The optional regex_subst parameter allows to further define what part of an attribute value should be stored as AVP.

An AVP can either be of type string or integer. As default, ldap_result stores LDAP attribute values as AVP of type string. The optional avp_type parameter can be used to explicitly specify the type of the AVP. It can be either str for string, or int for integer. If avp_type is specified as int then ldap_result tries to convert the LDAP attribute values to integer. In this case, the values are only stored as AVP if the conversion to integer is successful.

ldap_attr_name (string)

The name of the LDAP attribute who’s value should be stored, e.g. SIPIdentityServiceLevel or telephonenumber

avp_spec (var)

Specification of destination AVP, e.g. $avp(service_level) or $avp(12)

avp_type (string, optional)

Specification of destination AVP type, either str or int. If this parameter is not specified then the LDAP attribute values are stored as AVP of type string.

regex_subst (string)

Regex substitution that gets applied to LDAP attribute value before storing it as AVP, e.g. "/^sip:(.+)$/\1/" to strip off “sip:” from the beginning of an LDAP attribute value.

n > 0 (TRUE)

LDAP attribute ldap_attr_name found in LDAP result set and n LDAP attribute values stored in avp_spec

-1 (FALSE)

No LDAP attribute ldap_attr_name found in LDAP result set

-2 (FALSE)

Internal error occurred

This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.

Example Usage

...

# ldap_search call
...

# save SIPIdentityServiceLevel in $avp(service_level)
if (!ldap_result("SIPIdentityServiceLevel", $avp(service_level)))
{
    switch ($retcode)
    {
    case -1:
        # no SIPIdentityServiceLevel found
        sl_send_reply(403, "Forbidden");
        exit;
    case -2:
        # internal error
        sl_send_reply(500, "Internal server error");
        exit;
    default:
        exit;
    }
}

# save SIP URI domain in $avp(10)
ldap_result("SIPIdentitySIPURI", $avp(10), "/^[^@]+@(.+)$/\1/");
...

ldap_result_check(ldap_attr_name, string_to_match, [, regex_subst])

This function compares ldap_attr_name’s value with string_to_match for equality. It accesses the LDAP result set fetched by the last ldap_search call. The optional regex_subst parameter allows to further define what part of the attribute value should be used for the equality match. If ldap_attr_name is multi valued, each value is checked against string_to_match. If one or more of the values do match the function returns 1 (TRUE).

ldap_attr_name (string)

The name of the LDAP attribute who’s value should be matched, e.g. SIPIdentitySIPURI

string_to_match (string)

String to be matched. Included AVPs and pseudo variabels do get expanded.

regex_subst (string, optional)

Regex substitution that gets applied to LDAP attribute value before comparing it with string_to_match, e.g. "/^[^@]@+(.+)$/\1/" to extract the domain part of a SIP URI

1 (TRUE)

One or more ldap_attr_name attribute values match string_to_match (after regex_subst is applied)

-1 (FALSE)

ldap_attr_name attribute not found or attribute value doesn’t match string_to_match (after regex_subst is applied)

-2 (FALSE)

Internal error occurred

This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.

Example Usage

...
# ldap_search call
...

# check if 'sn' ldap attribute value equals username part of R-URI,
# the same could be achieved with ldap_result_check("sn/$rU")
if (!ldap_result_check("sn", $ru, "/^sip:([^@]).*$/\1/"))
{
    switch ($retcode)
    {
    case -1:
        # R-URI username doesn't match sn
        sl_send_reply(401, "Unauthorized");
        exit;
    case -2:
        # internal error
        sl_send_reply(500, "Internal server error");
        exit;
    default:
        exit;
    }
}
...

ldap_result_next()

An LDAP search operation can return multiple LDAP entries. This function can be used to cycle through all returned LDAP entries. It returns 1 (TRUE) if there is another LDAP entry present in the LDAP result set and causes ldap_result* functions to work on the next LDAP entry. The function returns -1 (FALSE) if there are no more LDAP entries in the LDAP result set.

1 (TRUE)

Another LDAP entry is present in the LDAP result set and result pointer is incremented by one

-1 (FALSE)

No more LDAP entries are available

-2 (FALSE)

Internal error

This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.

Example Usage

...
# ldap_search call
...

ldap_result("telephonenumber/$avp(tel1)");
if (ldap_result_next())
{
  ldap_result("telephonenumber/$avp(tel2)");
}
if (ldap_result_next())
{
  ldap_result("telephonenumber/$avp(tel3)");
}
if (ldap_result_next())
{
  ldap_result("telephonenumber/$avp(tel4)");
}
...

ldap_filter_url_encode(string, avp_spec)

This function applies the following escaping rules to string and stores the result in AVP avp_spec:

ldap_filter_url_encode() escaping rules

| character in

string	gets replaced with	defined in
*	\2a	RFC 4515
(	\28	RFC 4515
)	\29	RFC 4515
\	\5c	RFC 4515
?	%3F	RFC 4516

The string stored in AVP avp_spec can be safely used in an LDAP URL filter string.

string

String to apply RFC 4515 and URL escpaing rules to. AVPs and pseudo variables do get expanded. Example: "cn=$avp(name)"

avp_spec (var)

AVP to store resulting RFC 4515 and URL encoded string, e.g. $avp(ldap_search) or $avp(10)

1 (TRUE)

RFC 4515 and URL encoded filter_component stored as AVP avp_name

-1 (FALSE)

Internal error

This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.

Example Usage

...
if (!ldap_filter_url_encode("cn=$avp(name)", $avp(name_esc)))
{
    # RFC 4515/URL encoding failed --> silently discard request
    exit;
}

xlog("L_INFO", "encoded LDAP filter component: [$avp(name_esc)]\n");

if (ldap_search(
     "ldap://h350/ou=commObjects,dc=example,dc=com??sub?($avp(name_esc))"))
    { ... }
...

Exported Asynchronous Functions

ldap_search(ldap_url)

Performs an LDAP search operation using given LDAP URL and stores result internally for later retrieval by ldap_result* functions. If one ore more LDAP entries are found the function returns the number of found entries which evaluates to TRUE in the OpenSIPS configuration script. It returns -1 (FALSE) in case no LDAP entry was found, and -2 (FALSE) if an internal error like e.g. an LDAP error occurred.

ldap_url (string)

An LDAP URL defining the LDAP search operation (refer to ldap urls for a description of the LDAP URL format). The hostport part must be one of the LDAP session names declared in the LDAP configuration script.

Search with LDAP session named sipaccounts, base ou=sip,dc=example,dc=com, one level deep using search filter (cn=schlatter) and returning all attributes:

Example Usage of ldap_url

ldap://sipaccounts/ou=sip,dc=example,dc=com??one?(cn=schlatter)

Subtree search with LDAP session named ldap1, base dc=example,dc=com using search filter (cn=$(avp(name))) and returning SIPIdentityUserName and SIPIdentityServiceLevel attributes

Example Usage of ldap_url

ldap://ldap_1/dc=example,dc=com?
       SIPIdentityUserName,SIPIdentityServiceLevel?sub?(cn=$(avp(name)))

n > 0 (TRUE):

• Found n matching LDAP entries

-1 (FALSE):

• No matching LDAP entries found

-2 (FALSE):

• LDAP error (e.g. LDAP server unavailable), or
• internal error

This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.

Example Usage

...
# ldap search

route {
  async( ldap_search("ldap://sipaccounts/ou=sip,dc=example,dc=com??one?(cn=$rU)"), resume);
}
....
route[resume] {
{
    switch ($rc)
    {
    case -1:
        # no LDAP entry found
        sl_send_reply(404, "User Not Found");
        exit;
    case -2:
        # internal error
        sl_send_reply(500, "Internal server error");
        exit;
    default:
        exit;
    }
    xlog("L_INFO", "ldap_search: found [$retcode] entries for (cn=$rU)");

    # save telephone number in $avp(tel_number)
    ldap_result("telephoneNumber", $avp(tel_number)");
...
}

Installation & Running

Compiling the Module

OpenLDAP library (libldap) and header files (libldap-dev) v2.1 or greater (this module was tested with v2.1.3 and v2.3.32) are required for compiling the LDAP module. The OpenLDAP source is available at http://www.openldap.org/.

The OpenLDAP library is available pre-compiled for most UNIX/Linux flavors. On Debian/Ubuntu, the following packages must be installed:

$ apt-get install libldap2 libldap2-dev

.

Developer Guide

Overview

The LDAP module API can be used by other OpenSIPS modules to implement LDAP search functionality. This frees the module implementer from having to care about LDAP connection management and configuration.

In order to use this API, a module has to load the API using the load_ldap_api function which returns a pointer to a ldap_api structure. This structure includes pointers to the API functions described below. The LDAP module source file api.h includes all declarations needed to load the API, it has to be included in the file that loads the API. Loading the API is typically done inside a module’s mod_init call as the following example shows:

Example code fragment to load LDAP module API

#include "../../sr_module.h"
#include "../ldap/api.h"

/*
 * global pointer to ldap api
 */
extern ldap_api_t ldap_api;

...

static int mod_init(void)
{
    /*
     * load the LDAP API
     */
    if (load_ldap_api(&ldap_api) != 0)
    {
        LM_ERR("Unable to load LDAP API - this module requires ldap module\n");
        return -1;
    }

    ...
}

...

The API functions can then be used like in the following example:

Example LDAP module API function call

...

    rc = ldap_api.ldap_rfc4515_escape(str1, str2, 0);

...

API Functions

ldap_params_search

Performs an LDAP search using the parameters given as function arguments.

typedef int (*ldap_params_search_t)(int* _ld_result_count,
                                    char* _lds_name,
                                    char* _dn,
                                    int _scope,
                                    char** _attrs,
                                    char* _filter,
                                    ...);

int _ld_result_count*

The function stores the number of returned LDAP entries in _ld_result_count.

char _lds_name*

LDAP session name as configured in the LDAP module configuration file.

char _dn*

LDAP search DN.

int _scope

LDAP search scope, one of LDAP_SCOPE_ONELEVEL, LDAP_SCOPE_BASE, or LDAP_SCOPE_SUBTREE, as defined in OpenLDAP’s ldap.h.

char _attrs**

A null-terminated array of attribute types to return from entries. If empty (NULL), all attribute types are returned.

char _filter*

LDAP search filter string according to RFC 4515. printf patterns in this string do get replaced with the function arguments’ values following the _filter argument.

-1

Internal error.

0

Success, _ld_result_count includes the number of LDAP entries found.

ldap_url_search

Performs an LDAP search using an LDAP URL.

typedef int (*ldap_url_search_t)(char* _ldap_url,
                                 int* _result_count);

char _ldap_url*

LDAP URL as described in ldap urls.

int _result_count*

The function stores the number of returned LDAP entries in _ld_result_count.

-1

Internal error.

0

Success, _ld_result_count includes the number of LDAP entries found.

ldap_result_attr_vals

Retrieve the value(s) of a returned LDAP attribute. The function accesses the LDAP result returned by the last call of ldap_params_search or ldap_url_search. The berval structure is defined in OpenLDAP’s ldap.h, which has to be included.

This function allocates memory to store the LDAP attribute value(s). This memory has to freed with the function ldap_value_free_len (see next section).

typedef int (*ldap_result_attr_vals_t)(str* _attr_name,
                                       struct berval ***_vals);

typedef struct berval {
        ber_len_t       bv_len;
        char            *bv_val;
} BerValue;

str _attr_name*

str structure holding the LDAP attribute name.

**struct berval *_vals

A null-terminated array of the attribute’s value(s).

-1

Internal error.

0

Success, _vals includes the attribute’s value(s).

1

No attribute value found.

ldap_value_free_len

Function used to free memory allocated by ldap_result_attr_vals. The berval structure is defined in OpenLDAP’s ldap.h, which has to be included.

typedef void (*ldap_value_free_len_t)(struct berval **_vals);

typedef struct berval {
        ber_len_t       bv_len;
        char            *bv_val;
} BerValue;

**struct berval _vals

berval array returned by ldap_result_attr_vals.

ldap_result_next

Increments the LDAP result pointer.

typedef int (*ldap_result_next_t)();

-1

No LDAP result found, probably because ldap_params_search or ldap_url_search was not called.

0

Success, LDAP result pointer points now to next result.

1

No more results available.

ldap_str2scope

Converts LDAP search scope string into integer value e.g. for ldap_params_search.

typedef int (*ldap_str2scope_t)(char* scope_str);

char scope_str*

LDAP search scope string. One of “one”, “onelevel”, “base”, “sub”, or “subtree”.

-1

scope_str not recognized.

n >= 0

LDAP search scope integer.

ldap_rfc4515_escape

Applies escaping rules described in ldap filter url encode fn.

typedef int (*ldap_rfc4515_escape_t)(str *sin, str *sout, int url_encode);

*str sin

str structure holding the string to apply the escaping rules.

*str sout

str structure holding the escaped string. The length of this string must be at least three times the length of sin plus one.

int url_encode

Flag that specifies if a ’?’ character gets escaped with ‘%3F’ or not. If url_encode equals 0, ’?’ does not get escaped.

-1

Internal error.

0

Success, sout contains escaped string.

get_ldap_handle

Returns the OpenLDAP LDAP handle for a specific LDAP session. This allows a module implementor to use the OpenLDAP API functions directly, instead of using the API functions exported by the OpenSIPS LDAP module. The LDAP structure is defined in OpenLDAP’s ldap.h, which has to be included.

typedef int (*get_ldap_handle_t)(char* _lds_name, LDAP** _ldap_handle);

char _lds_name*

LDAP session name as specified in the LDAP module configuration file.

LDAP _ldap_handle**

OpenLDAP LDAP handle returned by this function.

-1

Internal error.

0

Success, _ldap_handle contains the OpenLDAP LDAP handle.

get_last_ldap_result

Returns the OpenLDAP LDAP handle and OpenLDAP result handle of the last LDAP search operation. These handles can be used as input for OpenLDAP LDAP result API functions. LDAP and LDAPMessage structures are defined in OpenLDAP’s ldap.h, which has to be included.

typedef void (*get_last_ldap_result_t)
       (LDAP** _last_ldap_handle, LDAPMessage** _last_ldap_result);

LDAP _last_ldap_handle**

OpenLDAP LDAP handle returned by this function.

LDAPMessage _last_ldap_result**

OpenLDAP result handle returned by this function.

Example Usage

The following example shows how this API can be used to perform an LDAP search operation. It is assumed that the API is loaded and available through the ldap_api pointer.

...

int rc, ld_result_count, scope = 0;
char* sip_username = "test";

/*
 * get LDAP search scope integer
 */
scope = ldap_api.ldap_str2scope("sub");
if (scope == -1)
{
    LM_ERR("ldap_str2scope failed\n");
    return -1;
}

/*
 * perform LDAP search
 */

if (ldap_api.ldap_params_search(
       &ld_result_count,
       "campus",
       "dc=example,dc=com",
       scope,
       NULL,
       "(&(objectClass=SIPIdentity)(SIPIdentityUserName=%s))",
       sip_username)
     != 0)
{
    LM_ERR("LDAP search failed\n");
    return -1;
}

/*
 * check result count
 */
if (ld_result_count < 1)
{
    LM_ERR("LDAP search returned no entry\n");
    return 1;
}

/*
 * get password attribute value
 */

struct berval **attr_vals = NULL;
str ldap_pwd_attr_name = str_init("SIPIdentityPassword");
str res_password;

rc = ldap_api.ldap_result_attr_vals(&ldap_pwd_attr_name, &attr_vals);
if (rc < 0)
{
    LM_ERR("ldap_result_attr_vals failed\n");
    ldap_api.ldap_value_free_len(attr_vals);
    return -1;
}
if (rc == 1)
{
    LM_INFO("No password attribute value found for [%s]\n", sip_username);
    ldap_api.ldap_value_free_len(attr_vals);
    return 2;
}

res_password.s = attr_vals[0]->bv_val;
res_password.len = attr_vals[0]->bv_len;

ldap_api.ldap_value_free_len(attr_vals);

LM_INFO("Password for user [%s]: [%s]\n", sip_username, res_password.s);

...

return 0;

Contributors

By Commit Statistics

Top contributors by DevScore⁽¹⁾, authored commits⁽²⁾ and lines added/removed⁽³⁾

#	Name	DevScore	Commits	Lines++	Lines—
1.	Christian Schlatter	60	6	5785	258
2.	Bogdan-Andrei Iancu (@bogdan-iancu)	25	20	148	145
3.	Ionut Ionita (@ionutrazvanionita)	23	5	1419	312
4.	Stefan Darius (@dariusstefan)	21	4	1647	153
5.	Razvan Crainea (@razvancrainea)	18	15	64	78
6.	Liviu Chircu (@liviuchircu)	14	9	123	164
7.	Vlad Patrascu (@rvlad-patrascu)	13	3	161	426
8.	Daniel-Constantin Mierla (@miconda)	12	9	84	83
9.	Razvan Pistolea	4	1	42	69
10.	Anca Vamanu	3	1	14	14

All remaining contributors: Dusan Klinec (@ph4r05), Henning Westerholt (@henningw), Zero King (@l2dy), Peter Lemenkov (@lemenkov), Konstantin Bokarius, Edson Gellert Schubert, Maksym Sobolyev (@sobomax).

(1) DevScore = author_commits + author_lines_added / (project_lines_added / project_commits) + author_lines_deleted / (project_lines_deleted / project_commits)

(2) including any documentation-related commits, excluding merge commits

(3) ignoring whitespace edits, renamed files and auto-generated files

By Commit Activity

#	Name	Commit Activity
1.	Stefan Darius (@dariusstefan)	Jun 2026 - Jul 2026
2.	Razvan Crainea (@razvancrainea)	Jun 2011 - Jun 2026
3.	Maksym Sobolyev (@sobomax)	Feb 2023 - Feb 2023
4.	Bogdan-Andrei Iancu (@bogdan-iancu)	Jul 2007 - Apr 2022
5.	Liviu Chircu (@liviuchircu)	Mar 2014 - Jul 2021
6.	Zero King (@l2dy)	Mar 2020 - Mar 2020
7.	Vlad Patrascu (@rvlad-patrascu)	May 2017 - Apr 2019
8.	Peter Lemenkov (@lemenkov)	Jun 2018 - Jun 2018
9.	Ionut Ionita (@ionutrazvanionita)	Oct 2014 - Jan 2017
10.	Dusan Klinec (@ph4r05)	Dec 2015 - Dec 2015

All remaining contributors: Anca Vamanu, Razvan Pistolea, Henning Westerholt (@henningw), Daniel-Constantin Mierla (@miconda), Konstantin Bokarius, Edson Gellert Schubert, Christian Schlatter.

(1) including any documentation-related commits, excluding merge commits

Documentation

Contributors

Last edited by: Razvan Crainea (@razvancrainea), Vlad Patrascu (@rvlad-patrascu), Peter Lemenkov (@lemenkov), Liviu Chircu (@liviuchircu), Ionut Ionita (@ionutrazvanionita), Bogdan-Andrei Iancu (@bogdan-iancu), Daniel-Constantin Mierla (@miconda), Konstantin Bokarius, Edson Gellert Schubert, Christian Schlatter.

License

All documentation files (i.e. .md extension) are licensed under the Creative Common License 4.0